East Midlands
Timber Sliding Patio Doors in Lincolnshire
Homes in Lincolnshire get Timber Sliding Patio Doors built around the opening they have, with the timber and finish specified against local conditions.
4 of the 12 towns we cover in Lincolnshire are coastal, where Accoya or dense hardwood and marine-grade stainless ironmongery are the sensible specification, and 2 carry designated conservation areas where the glazing pattern and mouldings need to match what is already there.
Most door problems are not the door. They are an opening that has moved, a cill that sheds water backwards, or a finish that was never cured properly. A survey is what separates a door that works from one you fight with.
Price and lead time in Lincolnshire
Timber Sliding Patio Doors start at £4,200 per set supplied and fitted, VAT included, with a typical lead time of 10–12 weeks. Try the indicative price tool for a range, or send sizes and we will be closer.
Common questions
What is lift-and-slide?
Turning the handle lifts the sash off its seals onto rollers, so it glides. Releasing it drops the sash back down and compresses the seals, which is why it holds weather far better than a simple slider.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
What if I only want a repair?
Then we quote a repair. Splicing a bottom rail, easing a dropped leaf or replacing a failed cill is often the right answer on a door worth keeping.
How long does a made-to-measure timber door take?
Most doors run six to ten weeks from survey to fitting, depending on the specification and the finish. Repairs and re-hangs are usually inside three weeks. We confirm dates at survey rather than guessing at enquiry stage.
Timber Sliding Patio Doors town by town
Specification changes with exposure and housing character — each town page says how.
Other doors in Lincolnshire
Get a fixed price for Lincolnshire
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.