Yorkshire and the Humber
Cottage Timber Doors in North Yorkshire
If you are replacing a door in North Yorkshire, Cottage Timber Doors are cut to your actual opening rather than to a nearest standard size.
2 of the 13 towns we cover in North Yorkshire are coastal, where Accoya or dense hardwood and marine-grade stainless ironmongery are the sensible specification, and 9 carry designated conservation areas where the glazing pattern and mouldings need to match what is already there.
Timber moves. The trick is not to stop it but to allow for it — correct moisture content at the workshop, sealed end grain, a finish that lets vapour out and keeps water off, and clearances set for the season you fit in.
Price and lead time in North Yorkshire
Cottage Timber Doors start at £1,250 per door supplied and fitted, VAT included, with a typical lead time of 6–8 weeks. Try the indicative price tool for a range, or send sizes and we will be closer.
Common questions
What is a ledged and braced door?
Vertical boards held by horizontal ledges with diagonal braces running from the bottom hinge corner upward, which stops the door dropping. The brace must run the right way or it does nothing.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
Can you work to an architect's specification?
Yes. Send the drawings and schedule and we will price against them, flagging anything that will not perform as drawn.
How wide can a single door be?
Around 1,100mm for a standard leaf before the weight starts to work against the hinges. Beyond that a pair or a leaf-and-a-half arrangement is the sensible answer.
Cottage Timber Doors town by town
Specification changes with exposure and housing character — each town page says how.
Other doors in North Yorkshire
Get a fixed price for North Yorkshire
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.