Wales
Timber Back Doors in Swansea
Our Timber Back Doors are made to order for Swansea, spray-finished and cured before delivery so the door arrives protected.
2 of the 5 towns we cover in Swansea are coastal, where Accoya or dense hardwood and marine-grade stainless ironmongery are the sensible specification.
Timber moves. The trick is not to stop it but to allow for it — correct moisture content at the workshop, sealed end grain, a finish that lets vapour out and keeps water off, and clearances set for the season you fit in.
Price and lead time in Swansea
Timber Back Doors start at £1,100 per door supplied and fitted, VAT included, with a typical lead time of 5–7 weeks. Try the indicative price tool for a range, or send sizes and we will be closer.
Common questions
Does a back door need the same specification as the front?
Usually more. Back doors are often on the weather side, get harder use and see wetter conditions from the garden.
How often should a coastal door be recoated?
Three to five years on exposed elevations, against seven or more inland. Salt-facing elevations always go first.
What timber holds up best near the coast?
Accoya first, then dense hardwoods. Modified timber barely moves with humidity swings, which is exactly the load a coastal door is under.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
What if my opening is not square?
Very few are. The survey records the actual dimensions at several heights and the door is made to suit, with the frame packed and scribed on fitting.
Is there a guarantee?
Ten years on the joinery and the factory finish, with the survey record kept so any claim is straightforward to deal with.
Other doors in Swansea
Get a fixed price for Swansea
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.