Wales
Timber Stable Doors in Swansea
We make and fit Timber Stable Doors throughout Swansea — measured properly, built from timber chosen for the exposure, and adjusted once they are in.
2 of the 5 towns we cover in Swansea are coastal, where Accoya or dense hardwood and marine-grade stainless ironmongery are the sensible specification.
Timber moves. The trick is not to stop it but to allow for it — correct moisture content at the workshop, sealed end grain, a finish that lets vapour out and keeps water off, and clearances set for the season you fit in.
Price and lead time in Swansea
Timber Stable Doors start at £1,600 per door supplied and fitted, VAT included, with a typical lead time of 6–8 weeks. Try the indicative price tool for a range, or send sizes and we will be closer.
Common questions
Do the two halves lock together?
Yes. A stable door has a shootbolt or drop bolt that ties the leaves so the whole door operates as one when closed.
What timber holds up best near the coast?
Accoya first, then dense hardwoods. Modified timber barely moves with humidity swings, which is exactly the load a coastal door is under.
How often should a coastal door be recoated?
Three to five years on exposed elevations, against seven or more inland. Salt-facing elevations always go first.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
What ironmongery do you supply?
Everything from period butt hinges and rim locks to modern multipoint systems, in finishes from polished brass to satin stainless. Coastal sites get marine-grade stainless as standard.
Can you fit a cat flap or letter plate?
Both, and it is better done in the workshop where the aperture can be sealed properly rather than cut on site.
Other doors in Swansea
Get a fixed price for Swansea
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.