Marlborough · Wiltshire · SN postcodes
Conservation Area Doors in Marlborough
We make and fit Conservation Area Doors throughout Marlborough — measured properly, built from timber chosen for the exposure, and adjusted once they are in.
Specifying a door for Marlborough
Marlborough sees a normal share of west-coast weather without the salt load of a seafront opening. Engineered stiles and a properly sealed bottom rail handle it comfortably.
Housing in and around Marlborough is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Moderately exposed — SN postcode area
- Timber
- Engineered redwood or hardwood
- Weather detail
- a full weatherbar, drip mould and rebated cill
- Ironmongery
- Stainless or quality plated ironmongery
- Recoating
- Every five to seven years on the weather elevation
Planning note. Marlborough has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Wiltshire planning before ordering.
Price and lead time in Marlborough
Conservation Area Doors start at £1,950 per door supplied and fitted, VAT included. Typical lead time is 8–11 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Will the council accept a new timber door?
Usually yes, if it matches the original pattern, mouldings and glazing. Refusals almost always follow proposals that change the appearance rather than the material.
What drawings will I need for an application?
Usually an elevation at 1:20, a section through the door and frame showing mouldings, and a written specification of timber, finish and glazing. We produce these.
What do conservation officers usually object to?
Wrong material, wrong glazing pattern, and mouldings that are close but not right. Timber matching the original pattern is rarely refused.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
What about draughts around the frame?
Compression seals in the rebate handle the leaf; the gap between frame and structure is a separate job, insulated and sealed on fitting rather than filled with expanding foam alone.
Do you fit in winter?
Yes. Clearances are set for the season and the finish is already cured, so there is no waiting for weather to paint on site.
Nearby
We cover the rest of Wiltshire too.
Get a fixed price for Marlborough
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.