Marlborough · Wiltshire · SN postcodes
Timber Door Repairs in Marlborough
If you are replacing a door in Marlborough, Timber Door Repairs are cut to your actual opening rather than to a nearest standard size.
Specifying a door for Marlborough
Marlborough sees a normal share of west-coast weather without the salt load of a seafront opening. Engineered stiles and a properly sealed bottom rail handle it comfortably.
Housing in and around Marlborough is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Moderately exposed — SN postcode area
- Timber
- Engineered redwood or hardwood
- Weather detail
- a full weatherbar, drip mould and rebated cill
- Ironmongery
- Stainless or quality plated ironmongery
- Recoating
- Every five to seven years on the weather elevation
Planning note. Marlborough has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Wiltshire planning before ordering.
Price and lead time in Marlborough
Timber Door Repairs start at £320 per visit supplied and fitted, VAT included. Typical lead time is 1–3 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Can rot be repaired or must the door be replaced?
Localised rot is cut out and spliced with matching timber, which is standard joinery practice. If it has reached the joints and the door is racking, replacement is the honest answer.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
What if I only want a repair?
Then we quote a repair. Splicing a bottom rail, easing a dropped leaf or replacing a failed cill is often the right answer on a door worth keeping.
How long does a made-to-measure timber door take?
Most doors run six to ten weeks from survey to fitting, depending on the specification and the finish. Repairs and re-hangs are usually inside three weeks. We confirm dates at survey rather than guessing at enquiry stage.
Nearby
We cover the rest of Wiltshire too.
Get a fixed price for Marlborough
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.