Llanrwst · Conwy · LL postcodes
Cottage Timber Doors in Llanrwst
If you are replacing a door in Llanrwst, Cottage Timber Doors are cut to your actual opening rather than to a nearest standard size.
Specifying a door for Llanrwst
Llanrwst is an exposed inland location, taking wind-driven rain off higher ground. The load on a door here is water forced against the joints rather than salt, so the priority is shedding water away from the bottom rail and keeping the coating film intact.
Housing in and around Llanrwst is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — LL postcode area
- Timber
- Accoya or engineered redwood with a high-build coating
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Stainless or hot-dip galvanised fixings
- Recoating
- Every three to five years on the weather elevation
Price and lead time in Llanrwst
Cottage Timber Doors start at £1,250 per door supplied and fitted, VAT included. Typical lead time is 6–8 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
What is a ledged and braced door?
Vertical boards held by horizontal ledges with diagonal braces running from the bottom hinge corner upward, which stops the door dropping. The brace must run the right way or it does nothing.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
Will a timber door swell and stick?
Timber moves with humidity, which is why clearances, sealed end grain and a breathable finish matter. A door made to the correct moisture content and finished on all six faces stays workable through the seasons.
What is engineered timber and why use it?
Engineered stiles are laminated from several sections with the grain alternated, so the door resists twisting far better than a solid section of the same size. Under paint it is the more stable choice.
Do you fit as well as supply?
Both. Most customers take supply and fit, which keeps the guarantee in one place. Supply-only is available if you have your own joiner.
What glazing goes in a timber door?
Sealed units in a range of obscure, etched, leaded and clear finishes, bedded and beaded from the inside so the glass cannot be removed from outside.
Nearby
We cover the rest of Conwy too.
Get a fixed price for Llanrwst
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.