Llanrwst · Conwy · LL postcodes
Edwardian Timber Doors in Llanrwst
We make and fit Edwardian Timber Doors throughout Llanrwst — measured properly, built from timber chosen for the exposure, and adjusted once they are in.
Specifying a door for Llanrwst
Llanrwst is an exposed inland location, taking wind-driven rain off higher ground. The load on a door here is water forced against the joints rather than salt, so the priority is shedding water away from the bottom rail and keeping the coating film intact.
Housing in and around Llanrwst is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — LL postcode area
- Timber
- Accoya or engineered redwood with a high-build coating
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Stainless or hot-dip galvanised fixings
- Recoating
- Every three to five years on the weather elevation
Price and lead time in Llanrwst
Edwardian Timber Doors start at £1,650 per door supplied and fitted, VAT included. Typical lead time is 7–9 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
How does an Edwardian door differ from a Victorian one?
The mouldings simplify, the top light gets bigger, and glazing becomes decorative — leaded, coloured or etched — where the Victorian door was mostly solid.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
What ironmongery do you supply?
Everything from period butt hinges and rim locks to modern multipoint systems, in finishes from polished brass to satin stainless. Coastal sites get marine-grade stainless as standard.
Can you fit a cat flap or letter plate?
Both, and it is better done in the workshop where the aperture can be sealed properly rather than cut on site.
How do you handle out-of-hours or emergency repairs?
Making a door secure and weathertight is usually possible quickly; the permanent repair follows once parts are available.
Do you offer trade supply?
Yes, for builders and joiners working to their own programme. Trade orders still go through the same survey and quality checks.
Nearby
We cover the rest of Conwy too.
Get a fixed price for Llanrwst
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.