Oundle · Northamptonshire · PE postcodes
Cottage Timber Doors in Oundle
If you are replacing a door in Oundle, Cottage Timber Doors are cut to your actual opening rather than to a nearest standard size.
Specifying a door for Oundle
Oundle is a relatively sheltered inland location, so the specification is driven more by how the door looks and how secure it is than by weather resistance.
Housing in and around Oundle is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Sheltered inland — PE postcode area
- Timber
- Engineered redwood, or oak where the grain is wanted
- Weather detail
- a standard weatherbar and drip mould
- Ironmongery
- Standard quality ironmongery in your chosen finish
- Recoating
- Every seven to nine years on the weather elevation
Planning note. Oundle has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Northamptonshire planning before ordering.
Price and lead time in Oundle
Cottage Timber Doors start at £1,250 per door supplied and fitted, VAT included. Typical lead time is 6–8 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
What is a ledged and braced door?
Vertical boards held by horizontal ledges with diagonal braces running from the bottom hinge corner upward, which stops the door dropping. The brace must run the right way or it does nothing.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
Can you supply just the door leaf?
Yes, if the existing frame is sound and correctly sized. We will check it at survey — hanging a new leaf in a failed frame wastes the door.
How much does a timber door cost?
Guide prices start from the figures shown on each product page, supplied and fitted. The variables are size, timber, glazing and ironmongery, and the survey fixes the number.
Nearby
We cover the rest of Northamptonshire too.
Get a fixed price for Oundle
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.