Oundle · Northamptonshire · PE postcodes
Timber Back Doors in Oundle
Homes in Oundle get Timber Back Doors built around the opening they have, with the timber and finish specified against local conditions.
Specifying a door for Oundle
Oundle is a relatively sheltered inland location, so the specification is driven more by how the door looks and how secure it is than by weather resistance.
Housing in and around Oundle is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Sheltered inland — PE postcode area
- Timber
- Engineered redwood, or oak where the grain is wanted
- Weather detail
- a standard weatherbar and drip mould
- Ironmongery
- Standard quality ironmongery in your chosen finish
- Recoating
- Every seven to nine years on the weather elevation
Planning note. Oundle has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Northamptonshire planning before ordering.
Price and lead time in Oundle
Timber Back Doors start at £1,100 per door supplied and fitted, VAT included. Typical lead time is 5–7 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Does a back door need the same specification as the front?
Usually more. Back doors are often on the weather side, get harder use and see wetter conditions from the garden.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
Do you fit as well as supply?
Both. Most customers take supply and fit, which keeps the guarantee in one place. Supply-only is available if you have your own joiner.
What glazing goes in a timber door?
Sealed units in a range of obscure, etched, leaded and clear finishes, bedded and beaded from the inside so the glass cannot be removed from outside.
Nearby
We cover the rest of Northamptonshire too.
Get a fixed price for Oundle
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.