Bala · Gwynedd · LL postcodes
Edwardian Timber Doors in Bala
We make and fit Edwardian Timber Doors throughout Bala — measured properly, built from timber chosen for the exposure, and adjusted once they are in.
Specifying a door for Bala
Bala is an exposed inland location, taking wind-driven rain off higher ground. The load on a door here is water forced against the joints rather than salt, so the priority is shedding water away from the bottom rail and keeping the coating film intact.
Housing in and around Bala is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — LL postcode area
- Timber
- Accoya or engineered redwood with a high-build coating
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Stainless or hot-dip galvanised fixings
- Recoating
- Every three to five years on the weather elevation
Price and lead time in Bala
Edwardian Timber Doors start at £1,650 per door supplied and fitted, VAT included. Typical lead time is 7–9 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
How does an Edwardian door differ from a Victorian one?
The mouldings simplify, the top light gets bigger, and glazing becomes decorative — leaded, coloured or etched — where the Victorian door was mostly solid.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
What about draughts around the frame?
Compression seals in the rebate handle the leaf; the gap between frame and structure is a separate job, insulated and sealed on fitting rather than filled with expanding foam alone.
Do you fit in winter?
Yes. Clearances are set for the season and the finish is already cured, so there is no waiting for weather to paint on site.
How do I get an indicative price quickly?
Use the guide-price tool, or send sizes and a photograph. Either gives a realistic range within a working day.
Do you survey before quoting?
We give an indicative price from sizes or photographs, then survey free of charge before anything is made. The survey is what turns an estimate into a fixed price.
Nearby
We cover the rest of Gwynedd too.
Get a fixed price for Bala
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.