Timber Door CompanyCrafted in wood. Built to last.

Betws-y-Coed · Conwy · LL postcodes

Edwardian Timber Doors in Betws-y-Coed

Edwardian Timber Doors for Betws-y-Coed properties: a free measured survey, a fixed price, and a door that still closes cleanly in the winter.

Specifying a door for Betws-y-Coed

Betws-y-Coed is an exposed inland location, taking wind-driven rain off higher ground. The load on a door here is water forced against the joints rather than salt, so the priority is shedding water away from the bottom rail and keeping the coating film intact.

Housing in and around Betws-y-Coed is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.

Exposure
Highly exposed — LL postcode area
Timber
Accoya or engineered redwood with a high-build coating
Weather detail
a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
Ironmongery
Stainless or hot-dip galvanised fixings
Recoating
Every three to five years on the weather elevation

Price and lead time in Betws-y-Coed

Edwardian Timber Doors start at £1,650 per door supplied and fitted, VAT included. Typical lead time is 7–9 weeks from survey. Use the indicative price tool for a range in about a minute.

Common questions

How does an Edwardian door differ from a Victorian one?

The mouldings simplify, the top light gets bigger, and glazing becomes decorative — leaded, coloured or etched — where the Victorian door was mostly solid.

What door suits a stone cottage?

A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.

Do I need building regulations approval?

Replacing a door like-for-like usually does not need approval, but the new door must meet current thermal and safety-glazing standards. We specify to comply as standard.

Can you make non-standard shapes?

Arched heads, splayed jambs, tapered cills and out-of-square openings are routine. Old buildings are rarely square and we build to the opening as found.

How do I look after the finish?

Wash the door twice a year with mild soapy water and check the bottom rail and cill for standing water. Recoating intervals depend on exposure and aspect — south and west elevations go first.

What if my opening is not square?

Very few are. The survey records the actual dimensions at several heights and the door is made to suit, with the frame packed and scribed on fitting.

Nearby

We cover the rest of Conwy too.

10-year guarantee
Free measured survey
Responsibly sourced timber
Nationwide installation
Fixed price, no surprises

Get a fixed price for Betws-y-Coed

Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.

Call usGet a quote