Betws-y-Coed · Conwy · LL postcodes
Georgian Timber Doors in Betws-y-Coed
Georgian Timber Doors made to measure for homes across Betws-y-Coed, surveyed on site and finished in the workshop before they are hung.
Specifying a door for Betws-y-Coed
Betws-y-Coed is an exposed inland location, taking wind-driven rain off higher ground. The load on a door here is water forced against the joints rather than salt, so the priority is shedding water away from the bottom rail and keeping the coating film intact.
Housing in and around Betws-y-Coed is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — LL postcode area
- Timber
- Accoya or engineered redwood with a high-build coating
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Stainless or hot-dip galvanised fixings
- Recoating
- Every three to five years on the weather elevation
Price and lead time in Betws-y-Coed
Georgian Timber Doors start at £1,900 per door supplied and fitted, VAT included. Typical lead time is 8–10 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Do I need a fanlight?
Not structurally, but the six-panel Georgian door was designed with one. Without it the proportions above the door usually look wrong.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
Can you replace the frame as well as the door?
Yes, and often it is the better answer. A new leaf in a rotten frame will not seal properly however well the door itself is made.
Is timber a sustainable choice?
Responsibly sourced timber is the only mainstream door material that stores carbon rather than emitting it in manufacture, and a timber door can be repaired rather than replaced.
Can you work to an architect's specification?
Yes. Send the drawings and schedule and we will price against them, flagging anything that will not perform as drawn.
How wide can a single door be?
Around 1,100mm for a standard leaf before the weight starts to work against the hinges. Beyond that a pair or a leaf-and-a-half arrangement is the sensible answer.
Nearby
We cover the rest of Conwy too.
Get a fixed price for Betws-y-Coed
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.