Burntisland · Fife · KY postcodes
Internal Timber Doors in Burntisland
We make and fit Internal Timber Doors throughout Burntisland — measured properly, built from timber chosen for the exposure, and adjusted once they are in.
Specifying a door for Burntisland
Burntisland sits on the coast, so doors here deal with salt-laden air as well as rain. Salt is hygroscopic — it holds moisture against the surface long after the weather has passed — which is why standard softwood and standard ironmongery both fail early within about a mile of open water.
Housing in and around Burntisland is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — KY postcode area
- Timber
- Accoya or a dense hardwood such as sapele
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Grade A4 marine stainless steel
- Recoating
- Every three to five years on the weather elevation
Price and lead time in Burntisland
Internal Timber Doors start at £420 per door supplied and fitted, VAT included. Typical lead time is 3–5 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Do internal doors need to be the same throughout?
Consistency reads well, but the practical requirement is consistent height and ironmongery. Mixing styles between floors is common in older houses and looks intentional.
How often should a coastal door be recoated?
Three to five years on exposed elevations, against seven or more inland. Salt-facing elevations always go first.
What timber holds up best near the coast?
Accoya first, then dense hardwoods. Modified timber barely moves with humidity swings, which is exactly the load a coastal door is under.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
How secure is a timber door?
A well-built timber door with a multipoint lock and reinforced keeps is at least as secure as a composite equivalent. The lock and the frame fixings matter more than the leaf material.
Do I need building regulations approval?
Replacing a door like-for-like usually does not need approval, but the new door must meet current thermal and safety-glazing standards. We specify to comply as standard.
Nearby
We cover the rest of Fife too.
Get a fixed price for Burntisland
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.