Shepton Mallet · Somerset · BA postcodes
Internal Timber Doors in Shepton Mallet
If you are replacing a door in Shepton Mallet, Internal Timber Doors are cut to your actual opening rather than to a nearest standard size.
Specifying a door for Shepton Mallet
Shepton Mallet sees a normal share of west-coast weather without the salt load of a seafront opening. Engineered stiles and a properly sealed bottom rail handle it comfortably.
Housing in and around Shepton Mallet is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Moderately exposed — BA postcode area
- Timber
- Engineered redwood or hardwood
- Weather detail
- a full weatherbar, drip mould and rebated cill
- Ironmongery
- Stainless or quality plated ironmongery
- Recoating
- Every five to seven years on the weather elevation
Planning note. Shepton Mallet has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Somerset planning before ordering.
Price and lead time in Shepton Mallet
Internal Timber Doors start at £420 per door supplied and fitted, VAT included. Typical lead time is 3–5 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Do internal doors need to be the same throughout?
Consistency reads well, but the practical requirement is consistent height and ironmongery. Mixing styles between floors is common in older houses and looks intentional.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
How long does a made-to-measure timber door take?
Most doors run six to ten weeks from survey to fitting, depending on the specification and the finish. Repairs and re-hangs are usually inside three weeks. We confirm dates at survey rather than guessing at enquiry stage.
Will a timber door swell and stick?
Timber moves with humidity, which is why clearances, sealed end grain and a breathable finish matter. A door made to the correct moisture content and finished on all six faces stays workable through the seasons.
Nearby
We cover the rest of Somerset too.
Get a fixed price for Shepton Mallet
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.