Perth · Perth and Kinross · PH postcodes
Oak Internal Doors in Perth
Homes in Perth get Oak Internal Doors built around the opening they have, with the timber and finish specified against local conditions.
Specifying a door for Perth
Perth sees a normal share of west-coast weather without the salt load of a seafront opening. Engineered stiles and a properly sealed bottom rail handle it comfortably.
Housing in and around Perth is largely Georgian and Regency townhouse stock, which suits six-panel raised-and-fielded doors set under a radial fanlight. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Moderately exposed — PH postcode area
- Timber
- Engineered redwood or hardwood
- Weather detail
- a full weatherbar, drip mould and rebated cill
- Ironmongery
- Stainless or quality plated ironmongery
- Recoating
- Every five to seven years on the weather elevation
Planning note. Perth has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Perth and Kinross planning before ordering.
Price and lead time in Perth
Oak Internal Doors start at £560 per door supplied and fitted, VAT included. Typical lead time is 4–6 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Solid oak or oak veneered?
Veneered on an engineered core is more stable and usually the better choice for internal use. Solid oak is heavier, moves more, and costs considerably more.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
What door suits a Georgian townhouse?
Six raised-and-fielded panels under a fanlight, in a painted finish. Proportion is everything: the panels step in size up the door rather than repeating equally.
Can you replace the frame as well as the door?
Yes, and often it is the better answer. A new leaf in a rotten frame will not seal properly however well the door itself is made.
Is timber a sustainable choice?
Responsibly sourced timber is the only mainstream door material that stores carbon rather than emitting it in manufacture, and a timber door can be repaired rather than replaced.
Nearby
We cover the rest of Perth and Kinross too.
Get a fixed price for Perth
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.