Perth · Perth and Kinross · PH postcodes
Timber Door Repairs in Perth
Our Timber Door Repairs are made to order for Perth, spray-finished and cured before delivery so the door arrives protected.
Specifying a door for Perth
Perth sees a normal share of west-coast weather without the salt load of a seafront opening. Engineered stiles and a properly sealed bottom rail handle it comfortably.
Housing in and around Perth is largely Georgian and Regency townhouse stock, which suits six-panel raised-and-fielded doors set under a radial fanlight. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Moderately exposed — PH postcode area
- Timber
- Engineered redwood or hardwood
- Weather detail
- a full weatherbar, drip mould and rebated cill
- Ironmongery
- Stainless or quality plated ironmongery
- Recoating
- Every five to seven years on the weather elevation
Planning note. Perth has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Perth and Kinross planning before ordering.
Price and lead time in Perth
Timber Door Repairs start at £320 per visit supplied and fitted, VAT included. Typical lead time is 1–3 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Can rot be repaired or must the door be replaced?
Localised rot is cut out and spliced with matching timber, which is standard joinery practice. If it has reached the joints and the door is racking, replacement is the honest answer.
What do conservation officers usually object to?
Wrong material, wrong glazing pattern, and mouldings that are close but not right. Timber matching the original pattern is rarely refused.
What drawings will I need for an application?
Usually an elevation at 1:20, a section through the door and frame showing mouldings, and a written specification of timber, finish and glazing. We produce these.
What door suits a Georgian townhouse?
Six raised-and-fielded panels under a fanlight, in a painted finish. Proportion is everything: the panels step in size up the door rather than repeating equally.
Do I need building regulations approval?
Replacing a door like-for-like usually does not need approval, but the new door must meet current thermal and safety-glazing standards. We specify to comply as standard.
Can you make non-standard shapes?
Arched heads, splayed jambs, tapered cills and out-of-square openings are routine. Old buildings are rarely square and we build to the opening as found.
Nearby
We cover the rest of Perth and Kinross too.
Get a fixed price for Perth
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.