Crieff · Perth and Kinross · PH postcodes
Timber Door Restoration in Crieff
Homes in Crieff get Timber Door Restoration built around the opening they have, with the timber and finish specified against local conditions.
Specifying a door for Crieff
Crieff is an exposed inland location, taking wind-driven rain off higher ground. The load on a door here is water forced against the joints rather than salt, so the priority is shedding water away from the bottom rail and keeping the coating film intact.
Housing in and around Crieff is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — PH postcode area
- Timber
- Accoya or engineered redwood with a high-build coating
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Stainless or hot-dip galvanised fixings
- Recoating
- Every three to five years on the weather elevation
Planning note. Crieff has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Perth and Kinross planning before ordering.
Price and lead time in Crieff
Timber Door Restoration start at £780 per door supplied and fitted, VAT included. Typical lead time is 3–5 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
When is a door worth restoring?
If the stiles and panels are sound, restoration is nearly always cheaper and better than replacement. Rot confined to the bottom rail or the foot of a stile can be spliced out.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
How much does a timber door cost?
Guide prices start from the figures shown on each product page, supplied and fitted. The variables are size, timber, glazing and ironmongery, and the survey fixes the number.
Can a timber door be made wheelchair accessible?
Yes. A low-threshold or ramped cill can be specified without losing the weather seal, and the leaf can be widened where the structural opening allows.
Nearby
We cover the rest of Perth and Kinross too.
Get a fixed price for Crieff
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.