Lowestoft · Suffolk · NR postcodes
Timber Door Restoration in Lowestoft
We make and fit Timber Door Restoration throughout Lowestoft — measured properly, built from timber chosen for the exposure, and adjusted once they are in.
Specifying a door for Lowestoft
Lowestoft sits on the coast, so doors here deal with salt-laden air as well as rain. Salt is hygroscopic — it holds moisture against the surface long after the weather has passed — which is why standard softwood and standard ironmongery both fail early within about a mile of open water.
Housing in and around Lowestoft is largely 1920s–1930s semi-detached stock, which suits three-panel doors with a wide glazed head, often in a sunburst or geometric lead pattern. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — NR postcode area
- Timber
- Accoya or a dense hardwood such as sapele
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Grade A4 marine stainless steel
- Recoating
- Every three to five years on the weather elevation
Price and lead time in Lowestoft
Timber Door Restoration start at £780 per door supplied and fitted, VAT included. Typical lead time is 3–5 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
When is a door worth restoring?
If the stiles and panels are sound, restoration is nearly always cheaper and better than replacement. Rot confined to the bottom rail or the foot of a stile can be spliced out.
How often should a coastal door be recoated?
Three to five years on exposed elevations, against seven or more inland. Salt-facing elevations always go first.
What timber holds up best near the coast?
Accoya first, then dense hardwoods. Modified timber barely moves with humidity swings, which is exactly the load a coastal door is under.
What door suits a 1930s semi?
A three-panel door with a wide glazed head, often leaded in a sunburst or geometric pattern. The glazed area is proportionally larger than on a Victorian door.
How secure is a timber door?
A well-built timber door with a multipoint lock and reinforced keeps is at least as secure as a composite equivalent. The lock and the frame fixings matter more than the leaf material.
Do I need building regulations approval?
Replacing a door like-for-like usually does not need approval, but the new door must meet current thermal and safety-glazing standards. We specify to comply as standard.
Nearby
We cover the rest of Suffolk too.
Get a fixed price for Lowestoft
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.