Moffat · Dumfries and Galloway · DG postcodes
Timber Door Restoration in Moffat
If you are replacing a door in Moffat, Timber Door Restoration are cut to your actual opening rather than to a nearest standard size.
Specifying a door for Moffat
Moffat is an exposed inland location, taking wind-driven rain off higher ground. The load on a door here is water forced against the joints rather than salt, so the priority is shedding water away from the bottom rail and keeping the coating film intact.
Housing in and around Moffat is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — DG postcode area
- Timber
- Accoya or engineered redwood with a high-build coating
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Stainless or hot-dip galvanised fixings
- Recoating
- Every three to five years on the weather elevation
Planning note. Moffat has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Dumfries and Galloway planning before ordering.
Price and lead time in Moffat
Timber Door Restoration start at £780 per door supplied and fitted, VAT included. Typical lead time is 3–5 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
When is a door worth restoring?
If the stiles and panels are sound, restoration is nearly always cheaper and better than replacement. Rot confined to the bottom rail or the foot of a stile can be spliced out.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
Do you work on listed buildings?
Regularly. Listed building consent is a separate process from planning, and we can supply the drawings and specification your application needs.
What happens if the door needs adjusting later?
First-season adjustment is included. Timber settles, buildings move, and a small tweak after a winter is normal rather than a fault.
Nearby
We cover the rest of Dumfries and Galloway too.
Get a fixed price for Moffat
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.