Timber Door CompanyCrafted in wood. Built to last.

Anstruther · Fife · KY postcodes

Timber Garage Doors in Anstruther

Timber Garage Doors made to measure for homes across Anstruther, surveyed on site and finished in the workshop before they are hung.

Specifying a door for Anstruther

Anstruther sits on the coast, so doors here deal with salt-laden air as well as rain. Salt is hygroscopic — it holds moisture against the surface long after the weather has passed — which is why standard softwood and standard ironmongery both fail early within about a mile of open water.

Housing in and around Anstruther is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.

Exposure
Highly exposed — KY postcode area
Timber
Accoya or a dense hardwood such as sapele
Weather detail
a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
Ironmongery
Grade A4 marine stainless steel
Recoating
Every three to five years on the weather elevation

Planning note. Anstruther has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Fife planning before ordering.

Price and lead time in Anstruther

Timber Garage Doors start at £2,900 per set supplied and fitted, VAT included. Typical lead time is 8–10 weeks from survey. Use the indicative price tool for a range in about a minute.

Common questions

Which garage door type suits timber best?

Side-hung, because the weight is carried on hinges rather than a mechanism. Up-and-over in timber works but the gear must be specified for the weight.

Does sea air really affect a timber door?

Yes, in two ways. Salt is hygroscopic so it holds moisture against the surface, and airborne chloride corrodes standard ironmongery quickly. Both are solvable at specification stage.

Which ironmongery survives salt air?

Grade A4 (marine) stainless steel. Standard A2 stainless and lacquered brass both fail within a few years within about a mile of open water.

Do I need permission to change a door in a conservation area?

Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.

Can modern sealed units go in a heritage door?

Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.

What door suits a Victorian terrace?

A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.

Nearby

We cover the rest of Fife too.

10-year guarantee
Free measured survey
Responsibly sourced timber
Nationwide installation
Fixed price, no surprises

Get a fixed price for Anstruther

Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.

Call usGet a quote