Consett · County Durham · DH postcodes
Timber Sliding Patio Doors in Consett
We make and fit Timber Sliding Patio Doors throughout Consett — measured properly, built from timber chosen for the exposure, and adjusted once they are in.
Specifying a door for Consett
Consett is an exposed inland location, taking wind-driven rain off higher ground. The load on a door here is water forced against the joints rather than salt, so the priority is shedding water away from the bottom rail and keeping the coating film intact.
Housing in and around Consett is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — DH postcode area
- Timber
- Accoya or engineered redwood with a high-build coating
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Stainless or hot-dip galvanised fixings
- Recoating
- Every three to five years on the weather elevation
Price and lead time in Consett
Timber Sliding Patio Doors start at £4,200 per set supplied and fitted, VAT included. Typical lead time is 10–12 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
What is lift-and-slide?
Turning the handle lifts the sash off its seals onto rollers, so it glides. Releasing it drops the sash back down and compresses the seals, which is why it holds weather far better than a simple slider.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
What if my opening is not square?
Very few are. The survey records the actual dimensions at several heights and the door is made to suit, with the frame packed and scribed on fitting.
Is there a guarantee?
Ten years on the joinery and the factory finish, with the survey record kept so any claim is straightforward to deal with.
Do you take a deposit?
A deposit is taken when the order is placed and the balance on completion. Nothing is payable before the survey and the written quotation.
What ironmongery do you supply?
Everything from period butt hinges and rim locks to modern multipoint systems, in finishes from polished brass to satin stainless. Coastal sites get marine-grade stainless as standard.
Nearby
We cover the rest of County Durham too.
Get a fixed price for Consett
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.