Ipswich · Suffolk · IP postcodes
Timber Sliding Patio Doors in Ipswich
We make and fit Timber Sliding Patio Doors throughout Ipswich — measured properly, built from timber chosen for the exposure, and adjusted once they are in.
Specifying a door for Ipswich
Ipswich is a relatively sheltered inland location, so the specification is driven more by how the door looks and how secure it is than by weather resistance.
Housing in and around Ipswich is largely 1920s–1930s semi-detached stock, which suits three-panel doors with a wide glazed head, often in a sunburst or geometric lead pattern. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Sheltered inland — IP postcode area
- Timber
- Engineered redwood, or oak where the grain is wanted
- Weather detail
- a standard weatherbar and drip mould
- Ironmongery
- Standard quality ironmongery in your chosen finish
- Recoating
- Every seven to nine years on the weather elevation
Planning note. Ipswich has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Suffolk planning before ordering.
Price and lead time in Ipswich
Timber Sliding Patio Doors start at £4,200 per set supplied and fitted, VAT included. Typical lead time is 10–12 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
What is lift-and-slide?
Turning the handle lifts the sash off its seals onto rollers, so it glides. Releasing it drops the sash back down and compresses the seals, which is why it holds weather far better than a simple slider.
What do conservation officers usually object to?
Wrong material, wrong glazing pattern, and mouldings that are close but not right. Timber matching the original pattern is rarely refused.
What drawings will I need for an application?
Usually an elevation at 1:20, a section through the door and frame showing mouldings, and a written specification of timber, finish and glazing. We produce these.
What door suits a 1930s semi?
A three-panel door with a wide glazed head, often leaded in a sunburst or geometric pattern. The glazed area is proportionally larger than on a Victorian door.
How do you price glazing?
By area and specification. Obscure and etched glass costs more than clear; leaded and stained panels are priced per panel once the pattern is agreed.
What is the difference between a door and a doorset?
A doorset is the leaf, frame, seals and ironmongery supplied together and pre-hung. It fits faster and performs more predictably than parts assembled on site.
Nearby
We cover the rest of Suffolk too.
Get a fixed price for Ipswich
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.