Knighton · Powys · LD postcodes
Timber Sliding Patio Doors in Knighton
Our Timber Sliding Patio Doors are made to order for Knighton, spray-finished and cured before delivery so the door arrives protected.
Specifying a door for Knighton
Knighton is an exposed inland location, taking wind-driven rain off higher ground. The load on a door here is water forced against the joints rather than salt, so the priority is shedding water away from the bottom rail and keeping the coating film intact.
Housing in and around Knighton is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — LD postcode area
- Timber
- Accoya or engineered redwood with a high-build coating
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Stainless or hot-dip galvanised fixings
- Recoating
- Every three to five years on the weather elevation
Price and lead time in Knighton
Timber Sliding Patio Doors start at £4,200 per set supplied and fitted, VAT included. Typical lead time is 10–12 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
What is lift-and-slide?
Turning the handle lifts the sash off its seals onto rollers, so it glides. Releasing it drops the sash back down and compresses the seals, which is why it holds weather far better than a simple slider.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
Is there a guarantee?
Ten years on the joinery and the factory finish, with the survey record kept so any claim is straightforward to deal with.
Do you take a deposit?
A deposit is taken when the order is placed and the balance on completion. Nothing is payable before the survey and the written quotation.
What ironmongery do you supply?
Everything from period butt hinges and rim locks to modern multipoint systems, in finishes from polished brass to satin stainless. Coastal sites get marine-grade stainless as standard.
Can you fit a cat flap or letter plate?
Both, and it is better done in the workshop where the aperture can be sealed properly rather than cut on site.
Nearby
We cover the rest of Powys too.
Get a fixed price for Knighton
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.