Welshpool · Powys · SY postcodes
Timber Sliding Patio Doors in Welshpool
Timber Sliding Patio Doors made to measure for homes across Welshpool, surveyed on site and finished in the workshop before they are hung.
Specifying a door for Welshpool
Welshpool sees a normal share of west-coast weather without the salt load of a seafront opening. Engineered stiles and a properly sealed bottom rail handle it comfortably.
Housing in and around Welshpool is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Moderately exposed — SY postcode area
- Timber
- Engineered redwood or hardwood
- Weather detail
- a full weatherbar, drip mould and rebated cill
- Ironmongery
- Stainless or quality plated ironmongery
- Recoating
- Every five to seven years on the weather elevation
Planning note. Welshpool has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Powys planning before ordering.
Price and lead time in Welshpool
Timber Sliding Patio Doors start at £4,200 per set supplied and fitted, VAT included. Typical lead time is 10–12 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
What is lift-and-slide?
Turning the handle lifts the sash off its seals onto rollers, so it glides. Releasing it drops the sash back down and compresses the seals, which is why it holds weather far better than a simple slider.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
What if I only want a repair?
Then we quote a repair. Splicing a bottom rail, easing a dropped leaf or replacing a failed cill is often the right answer on a door worth keeping.
How long does a made-to-measure timber door take?
Most doors run six to ten weeks from survey to fitting, depending on the specification and the finish. Repairs and re-hangs are usually inside three weeks. We confirm dates at survey rather than guessing at enquiry stage.
Nearby
We cover the rest of Powys too.
Get a fixed price for Welshpool
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.