Largs · Ayrshire · KA postcodes
Timber Sliding Patio Doors in Largs
We make and fit Timber Sliding Patio Doors throughout Largs — measured properly, built from timber chosen for the exposure, and adjusted once they are in.
Specifying a door for Largs
Largs sits on the coast, so doors here deal with salt-laden air as well as rain. Salt is hygroscopic — it holds moisture against the surface long after the weather has passed — which is why standard softwood and standard ironmongery both fail early within about a mile of open water.
Housing in and around Largs is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — KA postcode area
- Timber
- Accoya or a dense hardwood such as sapele
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Grade A4 marine stainless steel
- Recoating
- Every three to five years on the weather elevation
Price and lead time in Largs
Timber Sliding Patio Doors start at £4,200 per set supplied and fitted, VAT included. Typical lead time is 10–12 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
What is lift-and-slide?
Turning the handle lifts the sash off its seals onto rollers, so it glides. Releasing it drops the sash back down and compresses the seals, which is why it holds weather far better than a simple slider.
How often should a coastal door be recoated?
Three to five years on exposed elevations, against seven or more inland. Salt-facing elevations always go first.
What timber holds up best near the coast?
Accoya first, then dense hardwoods. Modified timber barely moves with humidity swings, which is exactly the load a coastal door is under.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
What is the difference between a door and a doorset?
A doorset is the leaf, frame, seals and ironmongery supplied together and pre-hung. It fits faster and performs more predictably than parts assembled on site.
Do you handle planning applications?
We do not submit on your behalf, but we produce the elevational drawings, sections and specification that conservation and planning officers ask for.
Nearby
We cover the rest of Ayrshire too.
Get a fixed price for Largs
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.