Caldicot · Monmouthshire · NP postcodes
Internal Timber Doors in Caldicot
We make and fit Internal Timber Doors throughout Caldicot — measured properly, built from timber chosen for the exposure, and adjusted once they are in.
Specifying a door for Caldicot
Caldicot sees a normal share of west-coast weather without the salt load of a seafront opening. Engineered stiles and a properly sealed bottom rail handle it comfortably.
Housing in and around Caldicot is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Moderately exposed — NP postcode area
- Timber
- Engineered redwood or hardwood
- Weather detail
- a full weatherbar, drip mould and rebated cill
- Ironmongery
- Stainless or quality plated ironmongery
- Recoating
- Every five to seven years on the weather elevation
Price and lead time in Caldicot
Internal Timber Doors start at £420 per door supplied and fitted, VAT included. Typical lead time is 3–5 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Do internal doors need to be the same throughout?
Consistency reads well, but the practical requirement is consistent height and ironmongery. Mixing styles between floors is common in older houses and looks intentional.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
Is there a guarantee?
Ten years on the joinery and the factory finish, with the survey record kept so any claim is straightforward to deal with.
Do you take a deposit?
A deposit is taken when the order is placed and the balance on completion. Nothing is payable before the survey and the written quotation.
What ironmongery do you supply?
Everything from period butt hinges and rim locks to modern multipoint systems, in finishes from polished brass to satin stainless. Coastal sites get marine-grade stainless as standard.
Can you fit a cat flap or letter plate?
Both, and it is better done in the workshop where the aperture can be sealed properly rather than cut on site.
Nearby
We cover the rest of Monmouthshire too.
Get a fixed price for Caldicot
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.