Monmouth · Monmouthshire · NP postcodes
Internal Timber Doors in Monmouth
Homes in Monmouth get Internal Timber Doors built around the opening they have, with the timber and finish specified against local conditions.
Specifying a door for Monmouth
Monmouth sees a normal share of west-coast weather without the salt load of a seafront opening. Engineered stiles and a properly sealed bottom rail handle it comfortably.
Housing in and around Monmouth is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Moderately exposed — NP postcode area
- Timber
- Engineered redwood or hardwood
- Weather detail
- a full weatherbar, drip mould and rebated cill
- Ironmongery
- Stainless or quality plated ironmongery
- Recoating
- Every five to seven years on the weather elevation
Planning note. Monmouth has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Monmouthshire planning before ordering.
Price and lead time in Monmouth
Internal Timber Doors start at £420 per door supplied and fitted, VAT included. Typical lead time is 3–5 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Do internal doors need to be the same throughout?
Consistency reads well, but the practical requirement is consistent height and ironmongery. Mixing styles between floors is common in older houses and looks intentional.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
Do you fit as well as supply?
Both. Most customers take supply and fit, which keeps the guarantee in one place. Supply-only is available if you have your own joiner.
What glazing goes in a timber door?
Sealed units in a range of obscure, etched, leaded and clear finishes, bedded and beaded from the inside so the glass cannot be removed from outside.
Nearby
We cover the rest of Monmouthshire too.
Get a fixed price for Monmouth
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.