Durham · County Durham · DH postcodes
Internal Timber Doors in Durham
Internal Timber Doors for Durham properties: a free measured survey, a fixed price, and a door that still closes cleanly in the winter.
Specifying a door for Durham
Durham sees a normal share of west-coast weather without the salt load of a seafront opening. Engineered stiles and a properly sealed bottom rail handle it comfortably.
Housing in and around Durham is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Moderately exposed — DH postcode area
- Timber
- Engineered redwood or hardwood
- Weather detail
- a full weatherbar, drip mould and rebated cill
- Ironmongery
- Stainless or quality plated ironmongery
- Recoating
- Every five to seven years on the weather elevation
Planning note. Durham has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with County Durham planning before ordering.
Price and lead time in Durham
Internal Timber Doors start at £420 per door supplied and fitted, VAT included. Typical lead time is 3–5 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Do internal doors need to be the same throughout?
Consistency reads well, but the practical requirement is consistent height and ironmongery. Mixing styles between floors is common in older houses and looks intentional.
What do conservation officers usually object to?
Wrong material, wrong glazing pattern, and mouldings that are close but not right. Timber matching the original pattern is rarely refused.
What drawings will I need for an application?
Usually an elevation at 1:20, a section through the door and frame showing mouldings, and a written specification of timber, finish and glazing. We produce these.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
Do I need building regulations approval?
Replacing a door like-for-like usually does not need approval, but the new door must meet current thermal and safety-glazing standards. We specify to comply as standard.
Can you make non-standard shapes?
Arched heads, splayed jambs, tapered cills and out-of-square openings are routine. Old buildings are rarely square and we build to the opening as found.
Nearby
We cover the rest of County Durham too.
Get a fixed price for Durham
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.