Timber Door CompanyCrafted in wood. Built to last.

Hexham · Northumberland · NE postcodes

Timber Stable Doors in Hexham

If you are replacing a door in Hexham, Timber Stable Doors are cut to your actual opening rather than to a nearest standard size.

Specifying a door for Hexham

Hexham is an exposed inland location, taking wind-driven rain off higher ground. The load on a door here is water forced against the joints rather than salt, so the priority is shedding water away from the bottom rail and keeping the coating film intact.

Housing in and around Hexham is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.

Exposure
Highly exposed — NE postcode area
Timber
Accoya or engineered redwood with a high-build coating
Weather detail
a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
Ironmongery
Stainless or hot-dip galvanised fixings
Recoating
Every three to five years on the weather elevation

Planning note. Hexham has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Northumberland planning before ordering.

Price and lead time in Hexham

Timber Stable Doors start at £1,600 per door supplied and fitted, VAT included. Typical lead time is 6–8 weeks from survey. Use the indicative price tool for a range in about a minute.

Common questions

Do the two halves lock together?

Yes. A stable door has a shootbolt or drop bolt that ties the leaves so the whole door operates as one when closed.

Do I need permission to change a door in a conservation area?

Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.

Can modern sealed units go in a heritage door?

Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.

What door suits a Victorian terrace?

A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.

Can I see a sample before ordering?

Timber and finish samples are available so you can see the colour on the actual species in your own light, which rarely matches a printed chart.

What if I only want a repair?

Then we quote a repair. Splicing a bottom rail, easing a dropped leaf or replacing a failed cill is often the right answer on a door worth keeping.

Nearby

We cover the rest of Northumberland too.

10-year guarantee
Free measured survey
Responsibly sourced timber
Nationwide installation
Fixed price, no surprises

Get a fixed price for Hexham

Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.

Call usGet a quote