Moffat · Dumfries and Galloway · DG postcodes
Timber Bi-Fold Doors in Moffat
Timber Bi-Fold Doors for Moffat properties: a free measured survey, a fixed price, and a door that still closes cleanly in the winter.
Specifying a door for Moffat
Moffat is an exposed inland location, taking wind-driven rain off higher ground. The load on a door here is water forced against the joints rather than salt, so the priority is shedding water away from the bottom rail and keeping the coating film intact.
Housing in and around Moffat is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — DG postcode area
- Timber
- Accoya or engineered redwood with a high-build coating
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Stainless or hot-dip galvanised fixings
- Recoating
- Every three to five years on the weather elevation
Planning note. Moffat has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Dumfries and Galloway planning before ordering.
Price and lead time in Moffat
Timber Bi-Fold Doors start at £5,400 per set supplied and fitted, VAT included. Typical lead time is 10–12 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Can timber bi-folds run smoothly long term?
Yes, on a top-hung track with the weight carried by the head rather than the cill. It keeps the running gear out of the water and the panels aligned.
What drawings will I need for an application?
Usually an elevation at 1:20, a section through the door and frame showing mouldings, and a written specification of timber, finish and glazing. We produce these.
What do conservation officers usually object to?
Wrong material, wrong glazing pattern, and mouldings that are close but not right. Timber matching the original pattern is rarely refused.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
Can you fit a cat flap or letter plate?
Both, and it is better done in the workshop where the aperture can be sealed properly rather than cut on site.
How do you handle out-of-hours or emergency repairs?
Making a door secure and weathertight is usually possible quickly; the permanent repair follows once parts are available.
Nearby
We cover the rest of Dumfries and Galloway too.
Get a fixed price for Moffat
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.